10 reasons why the internet crashes!!

Think of the time when you are working on an important document and suddenly your comp. crashes. You would be really not happy with this happening to you. So here are some reasons why the PC crashes and how to handle the crashes.

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings
Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives
After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses
Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the web-site of your antivirus software manufacturer.
7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000 , Windows Xp.



Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.


CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

Note: There can also be many reasons exept these so don’t rely on these totally

Increase speed of internet explorer

You always must have thought to increase the speed of http requests of inernet explorer without much effort. So here is your wished fulfilled.

To comply with current Internet standards, Internet Explorer limits the number of simultaneous downloads to two downloads, plus one queued download. This configuration is a function of the browser. However, as connection speeds increase, and the number of total connections that are allowed to Internet servers increase, the two-connection limit may be restrictive.

Please Note: Changing the maximum number of connections beyond two is a violation of Internet standards; use at your own risk!

To increase the number of simultaneous connections that are allowed, follow these steps:

1. Start the Registry Editor
2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings
3. Select New > DWORD Value from the Edit menu
4. Name the new value MaxConnectionsPer1_0Server
5. Right-click the MaxConnectionsPer1_0Server value and choose Modify
6. Under Base, click the radio button next to Decimal
7. In the Value Data: box enter the number of simultaneous connections you want to set (for example 10 is a good value), and 8. click OK
9. Repeat steps 3 - 7 using the new value MaxConnectionsPerServer
10. Exit the registry editor

Image formats

There are many graphic file formats, if we include the proprietary types. The PNG, JPEG, and GIF formats are most often used to display images on the Internet. These graphic formats are listed and briefly described below, separated into the two main families of graphics: raster and vector.


Image file formats(raster)

PNG

The PNG (Portable Network Graphics) file format is regarded and was made as the free and open successor to the GIF file format. The PNG file format supports true color (16 million colors) whereas the GIF file format only allows 256 colors. PNG excels when the image has large areas of uniform color. The lossless PNG format is best suited for editing pictures, and the lossy formats like JPG are best for final distribution of photographic-type images because of smaller file size. Many older browsers do not yet support the PNG file format. The Adam7-interlacing allows an early preview even when only a small percentage of the data of the image has been transmitted.


JPEG
The JPEG (Joint Photographic Experts Group) image files are a lossy format. The DOS filename extension is JPG, although other operating systems may use JPEG. Nearly all digital cameras have the option tosave images in JPEG format. The JPEG format supports 16-bit color and produces relatively small file sizes. Fortunately, the compression in most cases does not detract noticeably from the image. But JPEG files do suffer generational degradation when repeatedly edited and saved. Photographic images are best stored in a lossless non-JPEG format if they will be re-edited in future, or if the presence of small "artifacts" (blemishes), due to the nature of the JPEG compression algorithm, is unacceptable. JPEG is also used as the image compression algorithm in many Adobe PDF files.

TIFF

The TIFF (Tagged Image File Format) is a flexible image format that normally uses a filename extension of TIFF or TIF. TIFF's flexibility is both a feature and a curse, with no single reader capable of handling all the different varieties of TIFF files. TIFF can be lossy or lossless. Some types of TIFF offer relatively good
lossless compression for bi-level (black and white, no grey) images. Some high-end digital cameras have the option to save images in the TIFF format, using the LZW compression algorithm for lossless storage. The TIFF image format is not widely supported by web browsers, and should not be used on the World Wide Web. TIFF is still widely accepted as a photograph file standard in the printing industry. TIFF is capable of handling device-specific color spaces, such as the CMYK defined by a particular set of printing press inks.


RAW

The RAW image format is a file option available on some digital cameras. It usually uses a lossless compression and produces file sizes much smaller than the TIFF format. Unfortunately, the RAW format is not standard among all camera manufacturers and some graphic programs and image editors may not accept the RAW format. The better graphic editors can read some manufacturer's RAW formats, and some (mostly higher-end) digital cameras also support saving
images in the TIFF format directly. There are also separate tools available for converting digital camera raw image format files into other formats, one such tool being Dave Coffin's dcraw, which is made available under a combination of GNU General Public License and public domain licenses.

Adobe's Digital Negative Specification is a recent (September 2004) attempt at standardizing the various "raw" file formats used by digital cameras.

GIF

GIF (Graphic Interchange Format) is limited to an 8-bit palette, or 256 colors. This makes the GIF format suitable for storing graphics with relatively few colors such as simple diagrams, shapes and cartoon style images. The GIF format supports animation and is still widely used to provide image animation effects.


BMP

The BMP (bit mapped) format is used internally in the Microsoft Windows operating system to handle graphics images. These files are typically not compressed resulting in large files. The main advantage of BMP files is their wide acceptance and use in Windows programs. Their large size makes them unsuitable for file transfer. Desktop backgrounds and images from scanners are usually stored in BMP files.


XPM

The XPM format is the default X Window System picture format (very popular in the Linux world). Its structure is based on the string format of the C programming language. Because XPM was designed to be human-readable, and is stored as uncompressed plain-text, the file size of these pictures can be more than twice as large as uncompressed binary bitmap files (such as BMP, uncompressed TIFF, MacOS-PICT, or Irix-RGB formats). This format is unsupported by most non-Unix software and operating systems (though many web-browsers retain display support for the XBM subset, which was the minimal image format in the early days of the WWW).

MrSID

The MrSID (Multiresolution Seamless Image Database) format is a wavelet compression format used mostly by Geographic Information Systems to store massive satellite imagery for map software.

Vector formats
As opposed to the raster image formats above (where the data describes the characteristics of each individual pixel), vector image formats contain a geometric description which can be rendered smoothly at any desired display size.

SVG

SVG (Scalable Vector Graphics) is an open standard created and developed by the World Wide Web Consortium to address the need (and attempts of several corporations) for a versatile, scriptable and all-purpose vector format for the web and otherwise. The SVG format does not have a compression scheme of its own, but due to the textual nature of XML, an SVG graphic can be compressed using a program such as gzip. Because of its scripting potential, SVG is a
key component in web applications: interactive web pages that look and act like applications

GIF and JPEG are currently the primary file types for graphics on the Internet. This article provides an overview of each of them, as well as when each format should be used.

The GIF Format

The GIF format is one of the most popular formats on the Internet. Not only is the format excellent at compressing areas of images with large areas of the same color, but it is also the only option for putting animation online (unless you want to use Flash or other vector-based animation formats, which typically cost more). The GIF89a format also supports transparency, and interlacing.

GIF files support a maximum of 256 colors, which makes them practical for almost all graphics except photographs. The most common method of reducing the size of GIF files is to reduce the number of colors on the palette. It is important to note that GIF already uses the LZW compression scheme internally to make images as small as possible without losing any data

When to use them
Generally, GIF files should be used for logos, line drawings and icons. Avoid using it for photographic images, and graphics which have long stretches of continuous-tone in them. When you're designing GIF files, avoid using gradients and turn off anti- aliasing where possible to minimize the file size.



The JPEG Format

The JPEG format, with its support for 16.7 million colors, is primarily intended for photographic images. The internal compression algorithm of the JPEG format, unlike the GIF format, actually throws out information. Depending on what settings you use, the thrown out data may or may not be visible to the eye. Once you lower the quality of an image, and save it, the extra data cannot be regained so be sure to save the orginal



When to use
As a rule, the JPEG format should be used on photographic images, and images which do not look as good with only 256 colors.

12 Great Tips and tricks of Web designing

Here are 12 great tips and tricks from professional web designers:

Tip and trick No.1:
Put Important Information Near the Top Organize your pages from the top down.
Important info should be easy to find.

Tip and trick No.2: Limit Length of Pages Two or three screens should be the maximum length of any page.

Tip and trick No.3: Make Navigation Simple Be consistent in your placement of navigational tool, i.e. menus, buttons, etc.Make Images As Small As Possible Reduce physical size of images in Paint program before placing in your web page.

Tip and trick No.4: Use Web Palette (216 colors) This keeps files small and makes images look good on all monitors and systems.

Tip and trick No.5: Use GIF and JPEG Properly Use JPEG for photos and GIF for everything else.

Tip and trick No.6: Avoid Busy Backgrounds Text should be easy to read.

Tip and trick No.7: Make sure you have enough contrast.

Tip and trick No.8: Use ALT Parameter (low-res and/or text) for Images This is important for people viewing your pages with older computers.

Tip and trick No.9: Avoid Excessive Animation . Don’t animate images unless you have a good reason – it can be very irritating.


Tip and trick No.10: Use Tables to Format Text and Images This is the best way to control your layout.

Tip and trick No.11: Use Common Fonts This ensures that everyone sees your page as you designed it.

Tip and trick No.12: Don’t Center Entire Pages Use this only for titles and special situations.

These are the basics tips and tricks of Web designing...

How to obtain new ip

1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" or "cmd"and hit ok

You should now be at an MSDOS prompt screen.

4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"

You should now be on a screen with something titled "Local Area Connection",

8. Right click on "Local Area Connection" and click "properties"

9. Double-click on the "Internet Protocol (TCP/IP) " from the list under the "General" tab

10. Click on "Use the following IP address" under the "General" tab

11. Create an IP address (put any ip there like 1.2.3.4 it doesn't matter what you give there , this is only to tell you how to change your "IP" .

12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.

13. Hit the "Ok" button here

14. Hit the "Ok" button again

You should now be back to the "Local Area Connection" screen.

15. Right-click back on "Local Area Connection" and go to properties again.

16. Go back to the "TCP/IP" settings

17. This time, select "Obtain an IP address automatically"

18. Hit "Ok"

19. Hit "Ok" again

20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

Succesful method of breaking in e-mail accounts

One of the most successful method is achieved with the used of keyloggers and spy software. There are lots of spyware, logging tools available today such as 007, RemoteSpy, Netvizor, Email Spy, Chat Spy, Spector Pro, eBlaster, Invisible Keylogger, to name a few. This software will create a self extracting or installation file, you can then run it in the computer for surveillance, or email it to your target. The only question is, how can you convinced the recipient to open it?

Most hackers does not really hacking passwords by penetrating Yahoo, Hotmail, Gmail, and AOL servers, instead they will go for the easy way - the end user, that's you. It's not what you see on the movies such like "Hackers," "SwordFish," and so on. Too good to be true! They don't actually hack, but logs every stroke on your keyboard including the passwords you have input.

Keep in mind that computer surveillance Programs should be used only if necessary, it was not created to invade someone's privacy. If you are going to use it, be a responsible user.

Danger of ctrl+c in web

Just try this:
1) Copy any text by 'ctrl+c'
2) Click the Link: http://www.sourcecodesworld.com/special/clipboard.asp
You will see the text you copied on the Screen which was accessed by this web page. (Check it out !!)

Do not keep sensitive data (like passwords, reditcard numbers, PIN etc.) in the clipboard while surfing the web. It is extremely easy to extract the text stored in the clipboard to steal your sensitive information.

Be cautious ...

To avoid Clipboard Hack Problem, do the following:
1. In Internet Explorer, Go to Tools -> Internet options -> Security
2. Press Custom level.
3. In the security settings, select disable under Allow paste operations via script and click on 'OK. (Now the contents of your clipboard are safe

Enable Hidden Program Uninstallation !!

Enable Hidden Program Uninstallation !!
Add/Remove optional features of Windows XP

To dramatically expand the list of applications you can remove from Windows XP after installation, navigate to C:\WINDOWS\inf (substituting the correct drive letter for your version of Windows) and open the sysoc.inf file. Under Windows XP Professional Edition RC1, this file will resemble the following by default:

[Version] Signature = "$Windows NT$"
DriverVer=06/26/2001,5.1.2505.0

[Components]
NtComponents=ntoc.dll,NtOcSetupProc,,4
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Display=desk. cpl,DisplayOcSetupProc,,7

Fax=fxsocm. dll,FaxOcmSetupProc,fxsocm.inf,,7
NetOC=netoc.dll,NetOcSetupProc,netoc.inf,,7
iis=iis.dll,OcEntry,iis.inf,,7
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
IndexSrv_System = setupqry.dll,IndexSrv,setupqry.inf,,7
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
msmq=msmqocm.dll,MsmqOcm,msmqocm.inf,,6
ims=imsinsnt.dll,OcEntry,ims.inf,,7
fp_extensions=fp40ext. dll,FrontPage4Extensions,fp40ext.inf,,7
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
msnexplr=ocmsn.dll,OcEntry,msnmsn.inf,,7
smarttgs=ocgen.dll,OcEntry,msnsl.inf,,7
RootAutoUpdate=ocgen.dll,OcEntry,rootau.inf,,7
Games=ocgen.dll,OcEntry,games.inf,,7
AccessUtil=ocgen.dll,OcEntry,accessor.inf,,7
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
ZoneGames=zoneoc.dll,ZoneSetupProc,igames.inf,,7

[Global]
WindowTitle=%WindowTitle%

WindowTitle.StandAlone="*"

The entries that include the text hide or HIDE will not show up in Add/Remove Windows Components by default. To fix this, do a global search and replace for ,hide and change each instance of this to , (a comma). Then, save the file, relaunch Add/Remove Windows Components, and tweak the installed applications to your heart's content.

Change your cd key

You don't need to re-install if you want to try the key out ... just do this:

1. Go to Activate Windows
2. Select the Telephone option
3. Click "Change Product Key"
4. Enter xxxxx-xxxxx-xxxxx-xxxxx-xxxxx ( your 25 character product key)
5. Click "Update"

Now log off and log back in again. It should now show 60 days left, minus the number of days it had already counted down.
Note: If your crack de-activated REGWIZC.DLL and LICDLL.DLL, you are going to have to re-register them.

Registry hacking

Registry Hacking

Display legal notice on startup:

Wanna tell your friends about the do's and dont's in your computer when they login in your absence. Well you can do it pretty easily by displaying a legal notice at system start up.
REGEDIT
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system]
"legalnoticecaption"="enter your notice caption"
"legalnoticetext"="enter your legal notice text"

Automatic Administrator Login:

Well here's the trick which you can use to prove that Windows XP is not at all secure as multi-user operating system. Hacking the system registry from any account having access to system registry puts you in to the administrator account.
REGEDIT 4
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"

No Shutdown:

Wanna play with your friends by removing the shutdown option from start menu in their computer.
Just hack it down !!!
Regedit
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
"NoClose"="DWORD:1"

Different kinds of trojans

These trojans are the most popular trojans now.
Everyone wants to have such trojan because he
or she want to have access to their victim's hard drive.
The RAT'S (remote access trojans)are very
simple to use.Just make someone run the server
and you get the victim's IP and you have FULL
access to his or her computer.They you can
almost everything it depends of the trojan you use.
But the RAT'S have the common remote access trojan functions like:
keylogger,upload and download function,
make a screen shot and so on.Some people use the
trojans for malicious purposes.
They want just to delete and delete.This is lame.
There are many programs out there
that detects the most common trojans,but new trojans are
coming every day and these programs are not the maximum defense.
The trojans do always the same things.
If the trojan restart every time Windows is loaded that
means it put something in the registry
or in win.ini or in other system file so the trojan can restart.
Also the trojans create some file in
the WINDOWS\SYSTEM directory.The file is always looking
to be something that the victim will think
is a normal WINDOWS executable.Most trojans hide
from the Alt+Ctrl+Del menu.This is not
good because there are people who use only this way to see
which process are running.There are programs
that will tell me you exactly the process and the
file from where it comes.Yeah but some trojans
as I told you use fake names and it's a little hard
for some people to understand which process
should they kill.The remote access trojans opens
a port on your computer letting everyone to connect.
Some trojans has options like change the port
and put a password so only the guy that infect you
will be able to use the computer.The change
port option is very good because I'm sure you
don't want your victim to see that port 31337 is open
on their computer.Remote access trojans are
appearing every day and they will continue to appear.
For those that use such trojans: BE CAREFUL
you can infect yourself and they the victim you
wanted to destroy will revenge and you'll be sorry.
---------------------------------------
Password Sending Trojans

The purpose of these trojans is to rip all cached
passwords and send them to specified e-mail
without letting the victim about the e-mail.
Most of these trojans don't restart every time Windows
is loaded and most of them use port 25 to
send the e-mail.There are such trojans that e-mail
other information too like ICQ number
computer info and so on.These trojans are dangerous if
you have any passwords cached anywhere on your computer.
----------------------------------------
Keyloggers

These trojans are very simple.The only one thing
they do is to log the keys that the victim is pressing
and then check for passwords in the log file.
In the most cases these trojans restart every
time Windows is loaded.They have options
like online and offline recording.In the online recording
they know that the victim is online and
they record everything.But in the offline recording
everything written after Windows start is
recorded and saved on the victims disk waiting for
to be transferred.
----------------------------------------
Destructive

The only one function of these trojans is to
destroy and delete files.This makes them very simple
and easy to use.They can automatically
delete all your .dll or .ini or .exe files on your computer.
These are very dangerous trojans and once
you're infected be sure if you don't disinfect your
computer information will no longer exist.
-----------------------------------------
FTP
trojans
These trojans open port 21 on your computer
letting EVERYONE that has a FTP client to connect
to your computer without password and will full upload and download options.


These are the most common trojans.They all are dangerous
and you should me careful using them.

Earn money by sms

Hi,
How do you like the idea of getting paid to receive SMS? m-earn promises you just that !
These messages would only contain offer and discounts based on your own interests. You also get to decide the number of ads you receive and their delivery times!
Check out. Here
There is no limit to what you can earn by referring your friends and relatives..

India's no.1 paying site

Moneycosmos.com - Affiliate Program India !
Lots of People among them just want to sit beside the Pc and earn money .. In USA , Canada , Uk , and like all the Other Countries .. So here comes an oppurtunity for us to earn like they earn just sitting at home and Money Cosmos Helps us in Doing that , its simple just like 1 . 2 . 3 .

How will you earn Money?
In simple words, this is your once in a lifetime opportunity to earn money online. They will pay you up to $1.00 USD, Rs. 45.00 INR for each user who registers for FREE with our Advertiser. Plus, they also pay you a whopping 20% extra for transactions generated by members refered by you!

Why Money Cosmos?
Money Cosmos is a venture of Karmath Infotech Private Limited ®
There are several plus points about Money Cosmos, which differ us from other affiliate websites.

• Registration is 100% Free! No Hidden Cost
• You don't need to earn Rs.2,000 or 5,000 to get paid Our Minimum Payout is Just Rs.500
• You don't need to wait for 90 or even 60 days for payments. We pay monthly.
• We don't just say that we pay, we are the only website that proved that we really pay.

What are you waiting for? Click here to Join Money Cosmos

India's

Hide your files in a .jpeg file

For this, you will only need to download WinRAR. You just need to have a little knowledge about Command Prompt and have WinRAR installed.

1. Gather all the files that you wish to hide in a folder anywhere in your PC (make it in C:\hidden - RECOMMENDED).

2. Now, add those files in a RAR archive (e.g. secret.rar). This file should also be in the same directory (C:\hidden).

3. Now, look for a simple JPEG picture file (e.g. logo.jpg). Copy/Paste that file also in C:\hidden.

4. Now, open Command Prompt (Go to Run and type ‘cmd‘). Make your working directory C:\hidden.

5. Now type: “COPY /b logo.jpg + secret.rar output.jpg” (without quotes) - Now, logo.jpg is the picture you want to show, secret.rar is the file to be hidden, and output.jpg is the file which contains both.

6. Now, after you have done this, you will see a file output.jpg in C:\hidden. Open it (double-click) and it will show the picture you wanted to show. Now try opening the same file with WinRAR, it will show the hidden archive .

Customize the command prompt

1◘ Click on the Start Button and key in Command Prompt and hit Enter.

2◘ Once Command Prompt has started, right click on the top left icon in the menu bar and select Defaults. Alternatively you can select Properties if you want to have different settings for different Command Prompt shortcuts.

3◘ You will now see the four tabs of options to customize. The sections that I always work with are Font, Layout and Colors. To get started, click on the Font tab. Here you will be able to change the font and size used. If you would like a micro prompt as shown below, select Raster Fonts and size 4x6.

4◘ On the Layout tab you can specify the size and location of the window as well as the buffer. I usually only change the Screen Buffer Height setting. This controls how many previous command lines are saved and can be scrolled back up through.

5◘ Increasing this value is useful if you are looking at a large directory with more than 300 files. I always increase the Height value to the max which is 9999.

6◘ The Color tab is where you get to have the most fun changing the look of your Command Prompt. Just select what you want to change the color for and then change the color.

7◘ Back on the Options tab I recommend turning on Quick Edit Mode. This allows you to easily highlight text without having to go to Edit -> Mark and copy it by just right clicking. Then you can paste it by simply right clicking once more.

8◘ When you are finished customizing your Command Prompt, just hit OK to save your changes.

Tips for command prompt

Turn on Quick Edit Mode. This will allow you to easily select, copy and paste all with just your mouse and a right click.

When typing in a file or folder name, type in part of the name and then hit the . TAB key to bring up matches. Use SHIFT +TAB to go the other direction

When searching for a file, type in dir part_of_filename* to look for the file in the folder. To search sub directories as well, append the /s flag as well. Example: dir exp* /s

Use the up arrow to go back over past commands. Alternatively you can hit F7 and go directly to the command.

When working with network drives type: prompt $m$p$g to show the full network path along with the drive prompt. Other prompt settings can be found by running prompt /?.

You can print the contents of a file by typing: copy file.txt prn
Write the output of any command by appending > output.txt. For example, dir > filelist.txt

How to crack ANY TYPE OF CD PROTECTION

Now I’m gonna show you, how to crack any type of CD Protection, using W32Dasm (you can download it from http://prt.kgb.pl/index.php?path=misc%2Fprogramowanie),
and HIEW (http://www.hiew.ru/) .

OK, let’s start:
First of all, you have to run the game you want to crack, without the CD. The game, doesn’t work of course, BUT a window pops up, telling you an error message. This error message will help you to crack the game so, you’ve got to remember it.
For example:
Please insert the - CD, or: You need the CD to play the - . ( -, is thegame you want to crack). Anyway, if you can’t remember it,write it, in a little piece of paper. Now, run Win32Dasm , and on the toolbar, press the first little button on the left, OR, go to Disassembler
->Open file to Disassemble.
A menu will pop up. Select the exe which you want to crack. The disassemble, will take few minutes so,
OK, it finished its process. Now, in your screen, there is a strange text, and we can’t understand anything of course. Don’t worry, the only thing we have to do, ( If you want, you can change the font), is to click on the String Data References , the button next to the print button (Strn.REF). You can see a window which is called String Data Items . Scroll down, and try tofind the game’s error message. When you’ll find it , double click on it , and then,close the window, to go back to the Win32Dasm text. As you can see you are somewhere in the CD check routine. This is the message’s place.
Now comes the interesting and difficult part, so, be careful. We don’t know what all this mean, BUT we must know the @ offset ofevery call and jump command. Write down , every call and jump @ offset number. (You have to be sure, that the OPBAR change its used color to green). You need the number behind the @offset without the h.
Let’s go to Hiew.
HIEW:
To move up and down, use the cursor keys.
Start HIEW. exe. In the HIEW directory, there is a list of exes and programs. Go to the directory, which you saved the game’s exe, we want to crack, and click on the exe. Click F4,and then, a menu will pop up, with 3 words. Text, Hex, and Decode. Click on Decode, and now, we can understand the list of numbers.Click F5, and you can now enter the number, we wrote down, in Win32Dasm. Type it, and you will be placed at the number’s place. The cursor is placed on a command.
Before I’ll continue, I want to explain you something. For example, if the command where our cursor is placed, is E92BF9BF74, means that it is 5 bytes.Every 2 numbers, are one byte: E9-2B-F9-BF-74 = 90-90-90-90-90. 10 letters, mean, 5 bytes. The number 90, is the “Noop number”.OK, i hope you understood it ,
Press F3, which means edit, and now you can edit these ten numbers.Type five times, the number 90. For every byte, 90. Now click on F10 to exit.We cracked the CD protection of the - . Congratulations!!!!

Permanently activate windows vista

Install Windows Vista Ultimate edition (or other edition) without product key.
Windows Vista needs to be applied with 2099-ReArm trick, so that the counter of minutes to no activation required period will not return to normal after reboot. Click on Start Orb button.
Select “All Programs”, then “Accessories”.
Right click on “Command Prompt, then select “Run as Administrator (A)”.
If User Account Control (UAC) prompt a warning message, click on “Continue”.
In the command prompt, type date and press Enter. You will see the following:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>date
Current date: 12/19/2006 Thursday
Enter new date:
Enter 12/31/2099 (December 31, 2099).
Next, type cscript slmgr.vbs -rearm. You will see something like the following:

C:\Windows\system32>cscript slmgr.vbs -rearm
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.

The command completed successfully.
To make the change effectively, please restart the system.
Then reset the date of the system to current date again by typing date again. You will see the following:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>date
Current date: 12/31/2099 Thursday
Enter new date:
Type in current date, i.e. 12/19/2006.
Exit from command prompt, but do not restart the computer.
Download StopTimer.zip, StopTimer.zip, StopTimer.zip or StopTimer.zip torrent.
Extract the downloaded archive file into a folder. It should contains “Vista test crack.exe” and “timerstop.sys”.
Execute or run the “Vista test crack.exe” by right click on “Vista test crack.exe”, and select “Run as Administrator (A)”.
Optional: Press in Test button, and it will pop up a message says 4 timers are stopped. At this time, the counter should be freezed, Check with slmgr.vbs -dlv command, with the minutes left should be the same after a few minutes interval. If it’s the case, continue with the following steps to run the crack every startup.
In the Vista test crack window, click on “Install” button. You will be prompted with “Service installed” message if everything is done properly and correctly. The crack will copy the patched stoptimer.sys to system folder and install a new service named “timerstop” to stop kernel-mode timers in spsys.sys system file.
Exit from the crack, and restart the computer.
The hacking is basically done. Next few steps to to verify that the activation grace period built-in countdown timer is actually stopped and disable the timers from working properly, and make sure that the crack is installed properly. After restart, log on to Windows Vista. Run for a few minutes.
Press on Windows + R keys.
Type slmgr.vbs -dlv to check the time left to activate Windows Vista. If the time left is 43200 minutes that’s mean the crack is successful.


With the crack, you will have the following in the registry:


Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\TimerStop]
“Type”=dword:00000001
“Start”=dword:00000002
“ErrorControl”=dword:00000000
“ImagePath”=hex(2):5c,00,3f,00,3f,00,5c,00,45,00,3a,00,5c,00,57,00,69,00,6e,00,\
64,00,6f,00,77,00,73,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,\
00,5c,00,54,00,69,00,6d,00,65,00,72,00,53,00,74,00,6f,00,70,00,2e,00,73,00,\
79,00,73,00,00,00
“DisplayName”=”TimerStop”

Windows game cheats

Minesweeper


Secret - Reveal Mines

Instructions - Minimize or close all running applications. Launch Minesweeper, then type xyzzy. Next hold down either shift key for one second. Now when you move the mouse cursor over a Minesweeper square you will see a tiny white pixel in the top left corner of your desktop screen. This pixel will change to black when your mouse moves over a mine. You may need to change you desktop background to a solid color other then white or black to see the pixel.



Pinball


Secret - Extra Balls
Instructions - Type 1max at the start of a new ball to get extra balls.


Secret - Gravity Well
Instructions - Type gmax at the start of a new game to activate the Gravity Well.


Secret - Instant Promotion
Instructions - Type rmax at the start of a new game to go up in ranks.


Secret - Skill Shot
Instructions - Launch the ball partially up the chute past the third yellow light bar so it falls back down to get 75,000 points. There are six yellow light bars that are worth a varying amount of points:

First: 15,000 points
Second: 30,000 points
Third: 75,000 points
Fourth: 30,000 points
Fifth: 15,000 points
Sixth: 7,500 points


Secret - Test Mode
Instructions - Type hidden test at the start of a new ball to activate Test Mode. No notification will be given that this is activated but you can now left-click the mouse button and drag the ball around.


Secret - Unlimited Balls
Instructions - Type bmax at the start of a new ball. No notification will be given that this is activated but when a ball is lost a new ball will appear from the yellow wormhole indefinitely. Once this is activated you will be unable to activate other secrets without restarting




FreeCell


Secret - Instant Win
Instructions - Hold down Ctrl + Shift + F10 during game play. Then you will be asked if you want to Abort, Retry or Ignore. Choose Abort, then move any card to instantly win.


Secret - Hidden Game Modes
Instructions - In the "Game" menu choose "Select Game". Enter -1 or -2 to activate the hidden game modes.



Solitaire


Secret - Instant Win


Instructions - Press Alt + Shift + 2 during game play to instantly win.


Secret - Draw single cards in a Draw Three game


Instructions - Hold down CTRL + ALT + SHIFT while drawing a new card. Instead of drawing three cards you will only draw one.


Infinite Points


In the Windows XP version of solitaire, draw from the deck at least twice. Hold control and drag a card down from the deck. Click the "A" key and then let go of the left mouse key. You will get 10 points for this. Continue doing this for infinite points!

Infinite points trick II


To do this trick, finish a game of solitaire with the time bonus option on. The cards will start bouncing. Click on the solitaire screen and the play again box will pop up. Select no, so the solitaire screen is just blank green. Use the instant win cheat (Alt+Shift+2) and you will recieve the time bonus you got last game will be added to your last game's score. For example, if your time bonus was 5000, and your final score was 6000, after using this glitch, you will have a score of 11000. This glitch can be used as many times as you want.



registry hack which will allow you to see your opponents' cards
Launch REGEDIT.EXE and navigate to HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion Applets Hearts. NOTE: You may have to create the Hearts key under Applets In the right-hand pane, create a new String Value. Immediately rename it to "ZB" (without the quotes); give it a value of "42" (again, sans quotes). The next time you're in a game of Hearts, press CTRL + SHIFT + ALT + F12.

Remove windows messenger from xp

Copy and paste the following to a text file, and save as RemoveMsgr.bat

@echo off
RunDll32 advpack.dll,LaunchINFSection %windir%\inf\msmsgs.inf,BLC.Remove
@echo REGEDIT4>%TMP%\RemoveMsgr.reg
@echo.>>%TMP%\RemoveMsgr.reg
@echo [HKEY_LOCAL_MACHINE\Software\Microsoft\Outlook Express]>>%TMP%\RemoveMsgr.reg
@echo "Hide Messenger"=dword:00000002>>%TMP%\RemoveMsgr.reg
@echo.>>%TMP%\RemoveMsgr.reg
regedit /s %TMP%\RemoveMsgr.reg

• Close all Internet Explorer windows.
• Run RemoveMsgr.bat, When prompted, click Yes to close all affected applications.
• Restart your computer for the changes to take effect.

You are done ..

Secret Backdoor

Many sites that force users to register or even pay in order to search and use their content, leave a backdoor open for the Googlebot, because a prominent presence in Google searches is known to generate sales leads, site hits and exposure.
Examples of such sites are Windows Magazine, .Net Magazine, Nature, and many, many newspapers around the globe.
How then, can you disguise yourself as a Googlebot? Quite simple: by changing your browser's User Agent. Copy the following code segment and paste it into a fresh notepad file. Save it as Useragent.reg and merge it into your registry.

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
@="Googlebot/2.1"
"Compatible"="+http://www.googlebot.com/bot.html"

You're done!

You may always change it back again.... I know only one site that uses you User Agent to establish your eligability to use its services, and that's the Windows Update site...
To restore the IE6 User Agent, save the following code to NormalAgent.reg and merge with your registry:

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
@="Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5

Hacking web sites(another trick)

Server with one step login can be accessed via this method.

Not For all Websites

If you have the html and javascript knowledge then you can access password protected websites.
1. Open the website you want to hack. Provide wrong username-password in its log in form.

(e.g : Username : me and Password: ' or 1=1 --)

An error will occur saying wrong username-password. Now be prepared

Your experiment starts from here...

2. Right click anywhere on that error page =>> go to view source.


3. There you can see the html codings with javascripts.


4. There you find somewhat like this.... <_form action="..login....">
< =..login....>

5. Before this login information<=__LOGIN> copy the url of the site in which you are.

(e.g :"<_form..........action=http://www.targetwebsite.com/login.......><..........=HTTP: com="">")<..........=HTTP: com="">


6. Then delete the javascript from the above that validates your information in the server.(Do this very carefully, ur success to hack the site depends upon this i.e how efficiently you delete the javascripts that validate ur account information)


7. Then take a close look for "<_input name="password" type="password">"[without quotes] -> replace "<_type=text> " there <=TEXT>instead of "<_type=password>"<=TEXT><=>. See there if maxlength of password is less than 11 then increase it to 11 (e.g : if then write )


8. Just go to file => save as and save it any where in your hardisk with ext.html(e.g: c:\eg.html)


9. Reopen your target web page by double clicking eg.html' file that you have saved.


10. U see that some changes in current page as compared to original One. Don't get worried.

11. Provide any username[e.g:hacker] and password[e.g:' or 1=1 --]


Congrats!!!!!! You have successfully cracked the above website and entered into the account of Ist user saved in the server's database.


[Please read "_form"="form" & "_type"="type" & "_input"="input" without quotes]

The above trick won't work on the websites using latest technique to protect there servers. But you can find many sites !!
Enjoy !!

Crack password protected zip files

I will do by using FZC ..
What is FZC?
FZC is a program that cracks zip files (zip is a method of compressing multiple files into one smaller file) that are password-protected (which means you're gonna need a password to open the zip file and extract files out of it). You can get it anywhere - just use a search engine such as altavista.com.


FZC uses multiple methods of cracking - bruteforce (guessing passwords systematically until the program gets it) or wordlist attacks (otherwise known as dictionary attacks. Instead of just guessing passwords systematically, the program takes passwords out of a "wordlist", which is a text file that contains possible passwords. You can get lots of wordlists at www.theargon.com.).


FZC can be used in order to achieve two different goals: you can either use it to recover a lost zip password which you used to remember but somehow forgot, or to crack zip passwords which you're not supposed to have. So like every tool, this one can be used for good and for evil.

The first thing I want to say is that reading this tutorial... is the easy way to learn how to use this program, but after reading this part of how to use the FZC you should go and check the texts that come with that program and read them all. You are also going to see the phrase "check name.txt" often in this text. These files should be in FZC's directory. They contain more information about FZC.

FZC is a good password recovery tool, because it's very fast and also support resuming so you don't have to keep the computer turned on until you get the password, like it used to be some years ago with older cracking programs. You would probably always get the password unless the password is longer than 32 chars (a char is a character, which can be anything - a number, a lowercase or undercase letter or a symbol such as ! or &) because 32 chars is the maximum value that FZC will accept, but it doesn't really matter, because in order to bruteforce a password with 32 chars you'll need to be at least immortal..heehhe.. to see the time that FZC takes with bruteforce just open the Bforce.txt file, which contains such information.
FZC supports brute-force attacks, as well as wordlist attacks. While brute-force attacks don't require you to have anything, wordlist attacks require you to have wordlists, which you can get from www.theargon.com. There are wordlists in various languages, various topics or just miscellaneous wordlists. The bigger the wordlist is, the more chances you have to crack the password.

Now that you have a good wordlist, just get FZC working on the locked zip file


We need to keep in mind that are some people might choose some really weird passwords (for example: 'e8t7@$^%*gfh), which are harder to crack and are certainly impossible to crack (unless you have some weird wordlist). If you have a bad luck and you got such a file, having a 200MB list won't help you anymore. Instead, you'll have to use a different type of attack. If you are a person that gives up at the first sign of failure, stop being like that or you won't get anywhere. What you need to do in such a situation is to put aside your sweet xxx MB's list and start using the Brute Force attack.

If you have some sort of a really fast and new computer and you're afraid that you won't be able to use your computer's power to the fullest because the zip cracker doesn't support this kind of technology, it's your lucky day! FZC has multiple settings for all sorts of hardware, and will automatically select the best method.

Now that we've gone through all the theoretical stuff, let's get to the actual commands.


--------------------------------------------------------------------------------
Bruteforce
--------------------------------------------------------------------------------


The command line you'll need to use for using brute force is:

fzc -mb -nzFile.zip -lChr Lenght -cType of chars

Now if you read the bforce.txt that comes with fzc you'll find the description of how works Chr Lenght and the Type of chars, but hey, I'm gonna explain this too. Why not, right?... (but remember look at the bforce.txt too)

For Chr Lenght you can use 4 kind of switches...

-> You can use range -> 4-6 :it would brute force from 4 Chr passwors to 6 chr passwords
-> You can use just one lenght -> 5 :it would just brute force using passwords with 5 chars
-> You can use also the all number -> 0 :it would start brute forcing from passwords with lenght 0 to lenght 32, even if you are crazy i don't think that you would do this.... if you are thinking in doing this get a live...
-> You can use the + sign with a number -> 3+ :in this case it would brute force from passwords with lenght 3 to passwords with 32 chars of lenght, almost like the last option...

For the Type of chars we have 5 switches they are:

-> a for using lowercase letters
-> A for using uppercase letters
-> ! for using simbols (check the Bforce.txt if you want to see what simbols)
-> s for using space
-> 1 for using numbers


Example:
If you want to find a password with lowercase and numbers by brute force you would just do something like:

fzc -mb -nzTest.zip -l4-7 -ca1

This would try all combinations from passwords with 4 chars of lenght till 7 chars, but just using numbers and lowercase.

*****
hint
*****

You should never start the first brute force attack to a file using all the chars switches, first just try lowercase, then uppercase, then uppercase with number then lowercase with numbers, just do like this because you can get lucky and find the password much faster, if this doesn't work just prepare your brain and start with a brute force that would take a lot of time. With a combination like lowercase, uppercase, special chars and numbers.


--------------------------------------------------------------------------------
Wordlis
--------------------------------------------------------------------------------

Like I said in the bottom and like you should be thinking now, the wordlist is the most powerfull mode in this program. Using this mode, you can choose between 3 modes, where each one do some changes to the text that is in the wordlist, I'm not going to say what each mode does to the words, for knowing that just check the file wlist.txt, the only thing I'm going to tell you is that the best mode to get passwords is mode 3, but it takes longer time too.
To start a wordlist attak you'll do something like.

fzc -mwMode number -nzFile.zip -nwWordlist

Where:

Mode number is 1, 2 or 3 just check wlist.txt to see the changes in each mode.
File.zip is the filename and Wordlist is the name of the wordlist that you want to use. Remember that if the file or the wordlist isn't in the same directory of FZC you'll need to give the all path.

You can add other switches to that line like -fLine where you define in which line will FZC start reading, and the -lChar Length where it will just be read the words in that char length, the switche works like in bruteforce mode.
So if you something like

fzc -mw1 -nztest.zip -nwMywordlist.txt -f50 -l9+

FZC would just start reading at line 50 and would just read with length >= to 9.

Example:

If you want to crack a file called myfile.zip using the "theargonlistserver1.txt" wordlist, selecting mode 3, and you wanted FZC to start reading at line 50 you would do:

fzc -mw3 -nzmyfile.zip -nwtheargonlistserver1.txt -f50





--------------------------------------------------------------------------------
Resuming
--------------------------------------------------------------------------------

Other good feature in FZC is that FZC supports resuming. If you need to shutdown your computer and FZC is running you just need to press the ESC key, and fzc will stop. Now if you are using a brute force attack the current status will be saved in a file called resume.fzc but if you are using a wordlist it will say to you in what line it ended (you can find the line in the file fzc.log too).
To resume the bruteforce attack you just need to do:

fzc -mr

And the bruteforce attack will start from the place where it stopped when you pressed the ESC key.
But if you want to resume a wordlist attack you'll need to start a new wordlist attack, saying where it's gonna start. So if you ended the attack to the file.zip in line 100 using wordlist.txt in mode 3 to resume you'll type

fzc -mw3 -nzfile.zip -nwwordlist.txt -f100

Doing this FZC would start in line 100, since the others 99 lines where already checked in an earlier FZC session.

Add an Option to Print the Contents of a Folder !!

 

Add an Option to Print the Contents of a FolderFirst, you need to create a batch file called Printdir.bat. Open Notepad or another text editor and type (or cut and paste) this text:

@echo off
dir %1 /-p /o:gn > "%temp%\Listing"
start /w notepad /p "%temp%\Listing"
del "%temp%\Listing"
exit


Now, in the Save As dialog box, type "%windir%\Printdir.bat" (without the quotation marks) and click the Save button.
Click Start, Control Panel, Folder Options.
Click the File Types tab, and then click File Folder.
Click the Advanced button.
Click the New button.

In the Action box, type "Print Directory Listing" (without the quotation marks).

In the Application used to perform action box, type "Printdir.bat" (without the quotation marks).

Click OK in all three dialog boxes to close the dialog boxes.

You're not quite finished yet! Now you need to edit the Registry, so open your favorite Registry Editor.

Navigate to HKEY CLASSES ROOT\Directory\shell.

Right click on "default" and select Modify.
In the File Data box, type "none" (without the quotation marks).

Click OK and close the Registry Editor.

Now when you right click a folder, you'll see the option to Print Directory Listing. Selecting it will print the contents of the folder.

Increase your Net speed manually no need of Any software !!

First, u need to goto
Start, then run.
Type in regedit in the box.
Next, goto the
folder HKEY_LOCAL_MACHINE\System\CurrentControlSet\services\VxD\MSTCP
Now, find the string Default Rcv Window.
Now, edit the number to 64240 (was 65535).
Reboot your Computer and now you have Increase your Net Speed

Eliminating the Right Click on the Desktop !!

Take backup Before Editing Any Registry

1. Start Regedit

2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer

3. Add a DWORD and give it a name of NoViewContextMenu

4. Give it a value of 1

5. Reboot

Disabling the F3 search key

1. Start Regedit

2. Go to HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions

3. Create a Dword value called NoFindFiles

4. Give it a value of 1

5. Reboot